Espesor: 0.13mm - 1.0mm
Ancho: 750mm - 1250mm, todos disponibles
Peso del recubrimiento: AZ50 a AZ185
Thickness: 0.13mm - 1.0mm
Width: 750mm - 1250mm, all available
Coating Weight: AZ50 to AZ185
Especificación de Full Hard Galvalume Steel Coil:
1) Capacidad: cerca de 10.000 toneladas por mes para el acero del galvalume
2) Estándar: JIS3321 / ASTM A792M
3) Grueso: 0.13mm - 1.0mm, todo disponible
4) Ancho: 750mm - 1250mm, todo disponible
5) Longitud: según la petición del cliente
6) Coil ID: 508 / 610mm
7) Peso de la bobina: según la petición del cliente
8) Peso del recubrimiento: AZ50 a AZ185
9) Lentejuela: lentejuelas regulares, lentejuelas pequeñas, lentejuelas grandes
10) Tipo y grado de acero:
Specification of Full Hard Galvalume Steel Coil:
1) Capacity: about 10,000 ton per month for galvalume steel
2) Standard: JIS3321/ASTM A792M
3) Thickness: 0.13mm - 1.0mm, all available
4) Width: 750mm - 1250mm, all available
5) Length: according to the customer's request
6) Coil ID: 508/610mm
7) Coil weight: according to the customer's request
8) Coating Weight: AZ50 to AZ185
9) Spangle: regular spangle, small spangle, big spangle
10) Steel Type & Grade:
Tratamiento de superficie
11) Surface Treatment:
12) Aplicación de la bobina de acero completa de Galvalume duro:
a. Construcción: cubiertas, revestimientos, perfiles estructurales, paneles compuestos, etc.
segundo. Electrodomésticos: lavadora, frigoríficos, tostadora, microondas, etc.
do. Otros: conducto de aire, iluminación, carcasa de ordenador, etc.
Especificación básica
12) Application of Full Hard Galvalume Steel Coil:
a. Construction: roofing, cladding, structural sections, composite panels, etc.
b. Electric appliance: washing machine, refrigerators, toaster, microwave, etc.
c. Others: air duct, lighting, computer casing, etc.
Basic Specification
Descripción de Solar heater
1. Todas las partes mentales de la máquina son acero inoxidable y acero galvanizado
2. Tanque interno: Φ380mm / SUS304-2B / 1.2mm. Tanque exterior: Φ480mm / acero galvanizado / 0.35mm
3. Utiliza 50mm de espuma de alta densidad del poliuretano para la capa del aislamiento. Conservación del calor: 72 horas
4. Tubo de vacío: 58x1800mm 1.6mm o 2.2mmthickness ALN-SS-CU revestimiento
5. Tubo de calor de cobre dentro del tubo de vacío, tienen alto rendimiento de conducción
6. El soporte está en línea con la mecánica estructural, muy estable y solidamente construir. De doble propósito tanto para techo plano como inclinado.
7. No hay agua dentro de los tubos de evacuación, el calentador de agua solar puede todavía en servicio, incluso con varios tubos de rotura
8. Puede ser utilizado todo el año incluso en el área del clima frío
Ventajas del calentador solar
1. Adopta el mejor rendimiento de conducción de metal de calor
tubería (cobre).
2. Puesta en marcha rápida, transferencia de calor de la energía térmica
en el tanque de almacenamiento en una dirección
3. No hay agua dentro de los tubos de evacuación,
calentador de agua aún puede funcionar incluso con
roturas de tubos
4. Puede ser utilizado durante todo el año en el clima frío
Información del calentador solar
Nombre: DIYI Calentador solar de agua
Tipo: Sistema compacto y cerrado
Tubo de vacío: vidrio borosilicato de alta calidad 3.3, con el recubrimiento absorbente selectivo
Revestimientos absorbentes: Revestimiento de interferencia
Diámetro externo del tubo de vacío 58mm
Longitud del tubo de vacío: 1800mm
Diámetro interno del tanque / material: 360mm, 1.2mm, acero SUS304stainless
Diámetro externo del tanque / material: 460mm, acero colorido 0.41mm
Material del recubrimiento: AL-N / AL-Cu y tubo de calor dentro del tubo
Capa aislante: poliuretano de 50mm
Presión de ajuste de la válvula de seguridad: 6 bar
Soporte: acero inoxidable, placa de acero galvanizado, aleación de aluminio
Resistencia de granizo: 40mm
Principio de funcionamiento
El revestimiento selectivo de la cubierta interna de los tubos evacuados convierte la energía solar en energía térmica y transfiere el calor a las tuberías de calor
por las aletas de aluminio, el líquido en el tubo de calor se convierte en vapor que se eleva al condensador. El calor pasa a través del calor
intercambiador y el vapor se vuelve líquido, volviendo a la base del tubo de calor. El calor conduce al líquido de transferencia de calor (anticongelante
líquido o agua) a través de un tubo de cobre. Esta transferencia de calor al líquido crea una circulación continua siempre y cuando el colector sea calentado por
el sol.
Solar heater description
1. All machine mental parts is stainless steel and galvanized steel
2. Inner tank: Φ380mm/SUS304-2B/1.2mm. Outer tank: Φ480mm/Galvanized steel/0.35mm
3. It use 50mm of high density polyurethane foam for insulation layer. Heat preservation: 72hours
4. Vacuum tube: 58x1800mm 1.6mm or 2.2mmthickness ALN-SS-CU coating
5. Copper heat pipe inside the vacuum tube, have high conduction performance
6. The bracket is in line with structural mechanics, very stable and solidly build. Dual-purpose for both flat and inclined roof.
7. No water inside the evacuated tubes, the solar water heater can still in service even with several tubes breakage
8. Can be used all year even in the cold climate area
Solar heater advantages
1. Adopts the best conduction performance metal- heat
pipe (copper).
2. Start up quickly, heat pipe transfer the heat energy
into the storage tank in one direction
3. No water inside the evacuated tubes, the solar
water heater can still in service even with several
tubes breakage
4. Can be used all year round in the cold climate
Solar heater information
Name : DIYI Solar water heater
Type : Compact and closed system
Vacuum tube : high quality borosilicate glass 3.3, with the selective absorber coating
Absorbing coatings : Interference coating
External diameter of vacuum tube 58mm
Length of vacuum tube : 1800mm
Inner tank diameter/material : 360mm,1.2mm ,SUS304stainless steel
Outer tank diameter/material : 460mm,colorful steel 0.41mm
Material of coating : AL-N/AL-Cu and heat pipe inside the tube
Insulating layer : 50mm polyurethane
Safety valve setting pressure : 6 bar
Bracket : stainless steel , galvanized steel plate, aluminium alloy
Hail resistance : 40mm
Working Principle
The selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes
by aluminum fins, the liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat
exchanger and the vapour becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid(anti-freezing
liquid or water ) via a copper pipe. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by
the sun.
Característica de la bobina llena dura del acero de Galvalume:
1) Full Hard Galvalume Steel está compuesto de 55% de aluminio, 43,5% de zinc y 1,5% de Silicio.
2) El acero duro completo de Galvalume es formable, soldable y paintable.
3) El acero duro completo de Galvalume tiene resistencia de corrosión superior en las condiciones más atmosféricas. Esto se logra mediante la combinación de la protección sacrificial del zinc y la protección de barrera del aluminio.
4) Revestimiento de acero Galvalume duro lleno fuera-realice la capa galvanizada de 2-6 veces que el acero galvanizado de la inmersión caliente.
Feature of Full Hard Galvalume Steel Coil:
1) Full Hard Galvalume Steel is composed of 55% aluminum, 43.5% zinc and 1.5% Silicon.
2) Full Hard Galvalume steel is formable, weldable and paintable.
3) Full Hard Galvalume steel has superior corrosion resistance in the most atmospheric conditions. This is achieved through the combination of the sacrificial protection of the zinc and the barrier protection of the aluminum.
4) Full Hard Galvalume Steel coating out-perform galvanized coating from 2-6 times than hot dip galvanized steel.
NOSCOMUNICAREMOS CON USTED DENTRO DE LAS 8 HORAS