Grado: 0.125-5.0mm
Ancho:800-1700mm
Díametro Interior de Coil: 508/610mm
Thickness: 0.125-5.0mm
Width: 800-1700mm
Coil ID: 508/610mm
Especificación de bobina y hoja de acero electrogalvanizado:
1) Grado: SECC, SECD, SECE, etc.
2) Estándar: JIS G3313-1998 ASTM 1591-98
3) Peso del recubrimiento de zinc: 30g / m2-90g / m2
4) Tratamiento superficial: cromato; Aceite, fosfato; Anti-dedo.
5) Característica: resistencia a la corrosión, soldabilidad, formabilidad y adhesión de la pintura.
6) Tamaños disponibles:
Specification of Electrogalvanized Steel Coil & Sheet:
1) Grade: SECC, SECD, SECE, etc.
2) Standard: JIS G3313-1998 ASTM 1591-98
3) Zinc coating weight: 30g/m2-90g/m2
4) Surface treatment: Chromate; Oil, Phosphate; Anti-finger.
5) Feature: corrosion resistance, weldability, formability, and paint adhesion.
6) Available Sizes:
Electro Galvanized – sheet steel in coil and cut lengths that is zinc coated by electro-deposition for a light or thin coated mass. This product is
manufactured for use as formed or miscellaneous parts where corrosion resistance is necessary as opposed to an uncoated sheet. Electro
Galvanized is not intended to withstand outdoor exposure without chemical treatment or painting. The electro-galvanized sheet is produced as
commercial quality, drawing quality, drawing quality special killed, and structural or physical quality and is readily available in three zinc coating
class weights of A, B, or C. Electro-Galvanized ASTM A-879 This specification covers the requirements for zinc coatings applied by the
electrolytic process to any grade of hot-rolled or cold-rolled steel sheets for applications requiring designation of the coating mass on each
surface. Coating application shall be done on one or both surfaces with equal or differential coating masses and similar levels of corrosion
protection, and shall have no effect on the base metal mechanical properties. The coated sheets may be available as commercial steel (CS),
drawing steel (DS), deep drawing steel (DDS), extra-deep drawing steel (EDDS), structural steel (SS), high-strength low-alloy steel (HSLAS),
high-strength low-alloy steel with improved formability (HSLAS-F), solution-hardened steel (SHS), or bake-hardenable steel (BHS). Coatings
shall be designated accordingly, and shall undergo test methods such as weigh-strip-weigh method, nondestructive X-ray fluorescence
measurement, and Coulometric method. Accordingly, individual coating designations should conform to coating weight, mass per surface, and
thickness requirements.
Acero grado de bobina y hoja de acero electrogalvanizado:
Steel Grade of Electrogalvanized Steel Coil & Sheet:
Embalaje para bobina y hoja de acero electrogalvanizado:
Los productos de metal de Shanghai se embalan y etiquetan de acuerdo con las regulaciones y las solicitudes del cliente. Se tiene mucho cuidado para evitar cualquier daño que pueda ser causado durante el almacenamiento o el transporte. Además, las etiquetas transparentes se etiquetan en el exterior de los paquetes para facilitar la identificación del I. D de producto. y la información de calidad.
Packaging for Electrogalvanized Steel Coil & Sheet:
Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
Aplicación de Bobina y Hoja de Acero Electrogalvanizado:
1) Automóviles: filtros de aire, ventiladores, tanques de combustible, etc.
2) Electrodomésticos: electrodomésticos de refrigerador, hornos de microondas, impresoras, equipos de música y otras aplicaciones eléctricas.
3) Construcciones de edificios: materiales decorativos interiores y exteriores, techos, ductos, productos HVAC, tapajuntas, puertas, fajas, etc.
Application of Electrogalvanized Steel Coil & Sheet:
1) Automobiles: air filters, fans, fuel tanks, etc.
2) Home appliances: refrigerator appliances, microwave ovens, printer, stereo equipment and other electrical applications.
3) Building constructions: interior and exterior decorative materials,roofing, ductworks, HVAC products, flashing, doors, sashes, etc.
NOSCOMUNICAREMOS CON USTED DENTRO DE LAS 8 HORAS